You finally got the Troy-Bilt tractor parked in the shed, and then something fails. A tire goes flat, the starter clicks instead of cranks, or the carburetor starts surging at half throttle. The mower itself is fine. It’s the parts around it that decide whether you mow this weekend or push a walk-behind instead.
That’s the reality of Troy-Bilt ownership. These tractors run for years if you keep the wear items fresh, and the right replacement parts cost far less than a new machine. The tricky part is matching the part to your exact model, deck size, and engine family.
This guide covers five replacement items Troy-Bilt owners actually buy: front tires, a starter motor, a weatherproof cover, a carburetor, and a second tire set. Each one solves a specific failure point, and each fits a defined range of models. Check the current price on Amazon before you buy, and measure your old part first.
Here’s a quick side-by-side of the key specs so you can narrow the field before reading the full reviews.
| Features | CMOOD Tire Set | Ezamintaly Starter | Himal Mower Cover | ATRACYPART Carburetor | Makorae Tire Set |
|---|---|---|---|---|---|
| Primary Role | Front tire replacement | Engine starting | Weather protection | Fuel delivery | Front tire replacement |
| Key Spec | 15×6.00-6, 570 lb | 12V, 14 teeth | 72 x 54 x 46 in | Fits 15.5-17.5HP engines | 15×6.00-6, 400 lb |
| Build Material | Natural rubber, 4-ply | PMDD motor type | 420D Oxford, PU coat | High-grade alloy body | Rubber, 4-ply rated |
| Installation | Pre-assembled pair | Bolt-on replacement | Under 60 seconds | Direct swap, no pro | Pre-assembled pair |
| Best Use Case | Worn front tires | Cranks but won’t start | Open storage | Rough idle, surging | Turf-safe traction |

15×6.00-6 Lawn Mower Tire Set
CMOOD sells this as a two-pack of pre-mounted front tires for Craftsman, John Deere, and Husqvarna riders, and it fits most Troy-Bilt tractors running a 15×6.00-6 front wheel. If your old tire has a 3/4-inch bushing and a 3-inch hub, this drops right on. The load rating sits at 570 pounds per tire, which covers the front end of a standard 42-inch tractor with room to spare.
The rubber is natural, pneumatic, and 4-ply rated, so it holds air far better than the cheap tube-style tires many riders come with. The multi-trace tread bites into loose dirt and wet grass without chewing up the lawn on turns. And the set arrives assembled, meaning you skip the usual hunt for a matching rim and inner tube. That’s the part most buyers underestimate. Mounting a tire by hand takes an afternoon; bolting on a finished wheel takes ten minutes.
One honest catch: these are not for highway use, and the max is 30 PSI. Overinflate them and the ride gets harsh on bumpy ground. Also confirm your hub length before ordering, because a 3-inch hub won’t fit a 4-inch axle setup. Measure twice.
- 15×6.00-6 size with roughly 14.2-inch outer diameter
- 3/4-inch sintered iron bushings, 3-inch hub length
- 570 lb max load, 30 PSI ceiling
- Sold as a matched pair with rims and tubes
- 180-day return window
Best for: Owners replacing both front tires at once on a standard Troy-Bilt or Craftsman rider.
Ezamintaly Starter Replacement
A riding mower that clicks but won’t crank usually points to a dead starter, not a dead battery. Ezamintaly builds this 12V starter for Briggs and Stratton Intek and IC OHV engines in the 17HP to 20HP range, which covers most 42-inch Bronco and Pony tractors. The 14-tooth gear and counterclockwise rotation match the OEM spec, so it engages the flywheel the same way the factory unit did.
What stands out is the PMDD motor type. Permanent magnet starters draw less current than older field-coil designs, so your battery works less hard on cold mornings. Owners report faster, smoother cranking after the swap. It’s built to meet or exceed OEM standard, and the bolt pattern is a direct fit, so you won’t be drilling or shimming anything.
Here’s the trade-off. Starters fail for a reason, and a weak battery or corroded cables can kill a new one just as fast. Test your battery and clean the terminals before you install this. If the old starter was grinding rather than clicking, check the flywheel teeth too. The part is solid, but it won’t fix an underlying electrical fault.
- 12V, 14-tooth, counterclockwise rotation
- PMDD starter type for lower current draw
- Fits Briggs and Stratton Intek IC OHV 17-20HP
- Compatible with 42-inch Bronco and Pony tractors
- Single starter motor in the box
Best for: Troy-Bilt owners with a clicking starter and a confirmed-good battery.
Himal Outdoors Riding Mower Cover
Leaving a tractor outside without a cover is the fastest way to wreck a seat, fade a hood, and clog a carburetor with debris. Himal Outdoors makes this 420D Oxford cover for riders and zero-turns with decks up to 54 inches. It measures 72 x 54 x 46 inches, which fits most Troy-Bilt tractors in the Pony through Horse range.
The PU coating is the real story. Unlike PVC, it breathes, so condensation doesn’t build up under the fabric and soak the seat anyway. That’s the flaw in most cheap covers. This one keeps the tractor dry enough to mow right after a storm. Wind is handled with an elastic hem, two quick-release buckles, and Velcro straps, so it won’t end up in your neighbor’s yard during a gust.
No cover is perfect. The 420D fabric is tough but not armor, and sharp deck edges or exposed bolts can wear through it over a few seasons. Lay it on carefully. Also measure your mower first, since a 54-inch deck with a bagger attached may push past the listed dimensions.
- 420D Oxford cloth with breathable PU coating
- 72 x 54 x 46 inches, fits decks up to 54 inches
- Elastic hem plus dual buckles and Velcro straps
- UV-resistant fabric rated for 3+ years
- Includes a storage bag for off-season
Best for: Anyone storing a Troy-Bilt tractor outdoors or in an open shed.
ATRACYPART Carburetor Replacement
ATRACYPART
Carburetor Compatible with 42 Inch Troy Bilt Pony Riding Mower/Tractor Models 13WM77KS011 13AN77KS211 13WN77KS066 13AM77KS011 13AN77TG766 13AN77KG066 with 15.5HP/17.5HP Briggs & Stratton 500cc Engine
- [Fitment] Compatible with Troy Bilt MTD 13AL78BT066 13WN77BS011 13wm77ks011 Lawn Tractor; Compatible with Troy Bilt MTD 13AN77KS21…
- [Replace Part Number] The carb replaces #: 591731 593433 593514 594593 697141 697190 698445 699109 699916 699937 791858 791888 792…
- [Easy Installation] No need to hire a professional. With straightforward installation instructions, you can easily replace your ol…
Rough idle, surging, and hard starts on a 42-inch Pony or Bronco usually trace back to a gummed-up carburetor. ATRACYPART sells this replacement for Troy-Bilt and MTD tractors running 15.5HP or 17.5HP Briggs and Stratton 500cc engines. It replaces a long list of OEM part numbers, including 591731, 593433, and 594593, so you can cross-check your old carb before ordering.
The install is genuinely DIY-friendly. No professional needed, and the swap takes under an hour with basic hand tools. Once it’s on, the engine runs consistently instead of hunting for fuel at half throttle. The body is built from high-quality materials, and it’s rated to hold up under demanding conditions. A 12-month warranty backs it, which is more coverage than most aftermarket carbs offer.
One caveat worth knowing: a new carburetor won’t fix old fuel. Drain the tank, replace the fuel filter, and run fresh gas before you install this, or you’ll be back to surging within a month. Also confirm your engine displacement, since this fits 500cc units specifically.
- Fits 15.5HP and 17.5HP Briggs and Stratton 500cc
- Compatible with 42-inch Pony and Bronco models
- Cross-references 591731, 593433, 594593, and more
- Straightforward bolt-on installation
- Backed by a 12-month warranty
Best for: Do-it-yourselfers chasing a surging or hard-starting Troy-Bilt engine.
2 Pack 15×6.00-6 Lawn Mower Tires
Makorae’s two-pack targets the same 15×6.00-6 front position as the CMOOD set, but with a different priority: turf protection. The Turf Saver tread pattern grips well while leaving grass intact, which matters if you turn a lot on soft ground. It fits Craftsman and Husqvarna riders, plus most Troy-Bilt tractors running that wheel size. Hub length is 3 inches centered, bushing is 3/4 inch.
Load capacity lands at 400 pounds per tire, lower than the CMOOD set, so consider your tractor’s front-end weight before choosing between them. The rims come in dark gray, and the assembly ships pre-mounted, so there’s no tube-hunting or rim-matching. The tube-style construction is simple and reliable for typical residential mowing.
The lower load rating is the main limitation. If your tractor carries a heavy front attachment or you run a big bagger, the 570-pound CMOOD set is the safer pick. For a standard rider on flat to mildly sloped ground, 400 pounds is plenty. The 1-year warranty covers quality defects, not punctures or normal wear.
- 15×6.00-6 size, 14.2-inch outer diameter
- 3-inch centered hub with 3/4-inch bushing
- 400 lb load capacity per tire, 4-ply rated
- Turf Saver tread protects grass on turns
- Pre-assembled pair with dark gray rims
Best for: Owners who want turf-friendly front tires and don’t carry heavy front loads.
How We Chose These Products
These picks came from matching real Troy-Bilt failure points to parts that actually fit the listed models. A tire set is useless if the hub length is wrong, and a starter is useless if the tooth count doesn’t match. So fitment compatibility drove the first cut, not brand recognition.
From there, we weighed build quality, load ratings, warranty length, and how much of the job a buyer can do alone. Parts that ship pre-assembled or install without a professional got priority. So did items with clear cross-reference numbers, since Troy-Bilt owners often need to verify a part against an OEM code before ordering.
Buying Guide: What Really Matters
Measure your existing part before you buy anything. Tire size, hub length, bushing diameter, and tooth count are the numbers that decide fit. A 15×6.00-6 tire with a 3-inch hub won’t fit a 4-inch axle, no matter how good the reviews are.
Match the part to your engine family, not just your mower model. Troy-Bilt uses Briggs and Stratton engines across the Pony, Bronco, and Super Bronco lines, but displacement varies. A carburetor built for a 500cc engine won’t run right on a larger one. Write down your engine’s HP and CC before ordering.
Think about how you store the machine, too. A tractor kept outdoors needs a breathable cover, and a tractor on hilly ground needs tires with real grip. If your property has slopes or ditches, it’s worth reading a dedicated guide on mowers for hilly terrain before you commit to a tire or machine upgrade.
Our Top Recommendation
The CMOOD tire set wins on pure utility. It carries the highest load rating of the two tire options, ships fully assembled, and fits the widest range of Troy-Bilt front ends. For most owners, that’s the single most common replacement part they’ll ever need.
If your tractor sits outside, the Himal cover is the runner-up and arguably the cheapest insurance you can buy. And if you’re chasing an engine fault, the ATRACYPART carburetor and Ezamintaly starter cover the two most frequent no-start causes. Budget buyers on flat ground can save a little with the Makorae set, but check the 400-pound limit first.
Frequently Asked Questions
How do I know which tire size my Troy-Bilt uses?
The size is stamped on the sidewall of your current tire. Look for a number like 15×6.00-6, then measure the hub length and bushing diameter with a tape or caliper. Those three numbers are all you need.
Can I install a starter or carburetor myself?
Yes, both are bolt-on jobs with basic hand tools. The starter takes about 30 minutes, and the carburetor takes under an hour. Neither requires a mechanic if you label your fuel lines before removal.
Why does my mower surge after a carburetor swap?
Old fuel is usually the culprit. Gummed gas and a clogged fuel filter will foul a new carburetor fast. Drain the tank, replace the filter, and use fresh fuel with stabilizer.
Do I need a cover if I park in a shed?
An open shed still lets in dust, pollen, and blowing rain. A breathable cover keeps the seat dry and stops debris from settling into the engine and deck. It’s worth it either way.
For a broader look at how these tractors stack up against other brands, this Troy-Bilt riding mower comparison is a useful cross-check. And if you’re still deciding whether a tractor or a zero-turn suits your yard, see tractor-type riding mowers for the full breakdown.


