Mowing a hill is a different beast. You are not just cutting grass; you are wrestling with gravity, trying to keep traction, and hoping the deck doesn’t scalp the turf on every bump. The wrong blade turns a simple chore into a frustrating session of clumping and stalling.
Finding a blade that handles this requires more than just looking at the cutting edge. You need a design that creates enough lift to stand the grass up, but not so much that it bogs down a small engine. You also need a blade that won’t clog when you are forced to mow across the slope. We looked at the specific engineering that makes a blade suitable for this kind of work.
This guide covers three solid options that approach the problem differently. One is a precision fit for walk-behinds, another is a commercial set for zero-turns, and the last is a toothed design for riding mowers. Each has strengths and trade-offs worth knowing before you buy.
Here is how the three contenders compare on the specs that matter for slope work.
| Features | Maxpower 331528B | MaxPower 561156XB | Grasscool 42 Inch |
|---|---|---|---|
| Best For | 21-inch walk-behind mowers | 54-inch Hustler zero-turns | 42-inch Craftsman riders |
| Mounting Pattern | Bow tie center hole | 5/8-inch round center hole | 5-point star hole |
| Blade Length | 21-inch cut | 18.5-inch length | 21-inch length |
| Blade Design | Standard mulching profile | Commercial mulching set | Toothed mulching edge |
| Construction | Made in the USA | Made in the USA | 5mm thick steel |

Maxpower 331528B Walk-Behind
Maxpower
Maxpower 331528B USA MADE 21" Cut Mulching Blade | For 21" Cut MTD/Cub Cadet/Troy-Bilt Mowers, Replaces 742-0741, 942-0741, CMXGZAM100067
- Includes 1 mulching blade for many 21 in. cut MTD, Cub Cadet, Troy-Bilt, and Craftsman mowers. Must Match Current Blade OEM Number…
- Replaces OEM #'s: 742-0741, 742-0741A ,742-04276, 742-04276S, 942-0641, 942-0741, 942-0741A 942-04276, 942-04276S, CC-742-0741; Cr…
- Fits Cub Cadet Models: CC Series- CC 46M, CC 46MZ, CC 46ES, CC 439, CC 469, CC 949, CC 94M, CC 98M, CC 98H, CC 98K, CC 99M, CC 989…
This blade is the answer for people pushing a mower up and down a slope. It fits a wide range of 21-inch MTD, Cub Cadet, Troy-Bilt, and Craftsman walk-behinds. If your mower is from one of those brands and uses a bow tie mounting pattern, this is a direct swap for a dull factory blade.
The design focuses on chopping clippings fine enough to disappear into the lawn. On a hillside, this matters because it reduces the chance of leaving clumps that smother the grass below. The blade is built to handle the constant shifting of weight that happens when you push across an incline. It holds its edge reasonably well, though no blade likes hitting rocks on a steep pitch.
You need to check your current OEM numbers before ordering. The list of compatible models is long, but it is not universal. Getting this wrong means a blade that doesn’t sit flush or spins off balance. Also, this is a single blade, so if you have a newer mower with a different deck design, you will need to look elsewhere.
- Replaces OEM numbers like 742-0741 and 942-0741
- Fits many MTD, Cub Cadet, and Troy-Bilt 21-inch models
- Bow tie center hole with 2.5-inch spacing
- Single blade package for one walk-behind mower
- Designed for standard mulching duties
Best for: Owners of compatible 21-inch walk-behind mowers who need a reliable, USA-made replacement for tackling sloped yards.
MaxPower 561156XB Commercial Set
Maxpower
MaxPower 561156XB USA Made 3 Commercial Mulching Blade Set | For 54" Hustler mowers, Replaces OEM numbers 797704, 797712, 438-0001-00
- 3 Commercial Mulching Blade Set for 54" Hustler mowers
- Replaces OEM numbers 797704, 797712, 438-0001-00
- Meaures 18-1/2" L and 2-1/2" W
If the last pick felt too small, this one is the opposite. This is a set of three commercial mulching blades built specifically for 54-inch Hustler mowers. This is for someone running a zero-turn on acreage that rolls and dips. The set replaces OEM numbers 797704, 797712, and 438-0001-00.
These blades are long and wide, measuring 18.5 inches in length and 2.5 inches in width. That extra surface area generates serious lift to pull grass upright before cutting it. On a hillside, this lift helps prevent the deck from sucking down and scalping the high spots. The 5/8-inch center hole fits the larger spindles found on commercial decks.
The trade-off here is weight. These are heavy-duty blades, and they will put more strain on the engine and belt system than a lighter set. If your Hustler is older or the belts are worn, you might notice some slipping when you engage the deck on a steep incline. This is a professional-grade part for a machine that is expected to work hard.
- Includes three blades for a complete 54-inch deck set
- Fits Hustler mowers requiring OEM 797704
- Measures 18.5 inches long and 2.5 inches wide
- Features a 5/8-inch center hole for commercial spindles
- Proudly made in the USA
Best for: Commercial operators or large property owners with a 54-inch Hustler who need a durable, balanced set for rough, uneven ground.
Grasscool 42 Inch Deck Blade
This Grasscool blade is built for the popular 42-inch Craftsman and Poulan Pro riding mowers. It uses a toothed mulching design, which is a different approach than the standard edge. The serrations help shred grass and leaves into smaller pieces before they get recirculated in the deck.
For hillside work, the toothed edge is useful when dealing with thick grass that tends to lay over. The teeth grab the material and pull it up into the cutting zone. This blade also has a 1-inch lift, which is a moderate amount. It is enough to keep clippings suspended without creating so much vacuum that the mower struggles to climb.
There is a major compatibility catch here. This blade uses a 5-point star mounting hole. Craftsman mowers have used both 5-point and 6-point star patterns over the years. You must remove your current blade and count the points before buying. Ordering this for a 6-point mower will leave you with a useless piece of metal.
- Replaces OEM numbers like 134149 and 138498
- Fits Craftsman T110, LT1000, and LT2000 series
- 21-inch length with a 2.5-inch width
- 5-point star center hole pattern
- Thick 5mm steel construction
Best for: Homeowners with a 42-inch Craftsman or Poulan Pro rider who want an aggressive toothed blade to handle thick grass on slopes.
How We Chose These Products
We started with the physical demands of mowing an incline, not just the marketing claims. A blade for a hillside needs to manage lift carefully. Too little lift leaves clumps; too much lift can bog down the engine or cause the deck to scalp. We looked at the mounting patterns and lengths to ensure these blades would fit the most common mowers people actually use on slopes.
We also considered the build quality and the source. All three of these blades come from manufacturers with a track record. We prioritized options with clear compatibility lists so you can verify the fit before spending money. The final selection covers the three main mower types: walk-behind, zero-turn, and standard riding mower.
Buying Guide: What Really Matters
Deck size dictates blade length. A 21-inch blade will not fit a 42-inch deck. Measure your old blade or check your deck size first. The mounting hole pattern is just as critical. Whether it’s a bow tie, a 5-point star, or a simple round hole, the pattern must match exactly or the blade will not spin true.
Lift is the design element that affects hillside performance most. High-lift blades create strong airflow for bagging, but they can strain a small engine on a slope. Medium or low-lift blades are often better for mulching on uneven ground because they reduce the risk of stalling and scalping. The toothed design on the Grasscool blade offers a good middle ground.
Consider how often you mow. If you let the grass get tall before cutting, a standard blade will clog. A toothed blade or a design with more aggressive angles will handle that better. For the best results on a hill, you also want to mow across the slope, not up and down, to reduce the chance of the mower tipping.
Our Top Recommendation
For most homeowners, the Maxpower 331528B is the smartest pick. It covers the largest number of walk-behind mowers, which are the most common machines used on smaller sloped lots. The USA-made construction gives you confidence in the steel quality. It is a straightforward replacement that solves the problem of a dull or inadequate factory blade.
If you are running a larger property with a zero-turn, the MaxPower 561156XB set is the better choice. It provides the commercial durability needed for frequent use. For those with a 42-inch Craftsman rider who struggle with thick grass, the Grasscool toothed blade offers a more aggressive cut that standard blades cannot match.
Frequently Asked Questions
How tight should I torque the blade bolt?
Tighten the bolt to between 70 and 90 foot-pounds for most walk-behind mowers. For larger riding mowers, check your manual, but 70-100 foot-pounds is a safe range. The vibration on a rough slope can loosen a bolt over time, so recheck it after the first hour of use.
Will a high-lift blade make my mower stall on a hill?
It can. High-lift blades create a strong vacuum that pulls the mower down and increases drag on the engine. On a steep incline, this extra load can cause belt slip or stalling. A medium-lift or toothed mulching blade is usually a safer bet for slopes.
How often should I sharpen blades used on hillsides?
Plan on sharpening every 10 to 15 hours of use. Mowing on slopes often means hitting dirt or small rocks, which dulls the edge faster than flat ground. A dull blade tears grass, leaving a brown tip that is more visible on an incline.
Is it better to mow up and down or sideways on a hill?
Mow across the slope with a walk-behind mower to maintain traction. For a riding mower, mow straight up and down to avoid tipping. Never mow sideways on a steep slope with a rider. The right blade helps, but it cannot fix a dangerous mowing angle.


