Best Ramps For Lawn Mower

Loading a riding mower into a shed or pickup bed can turn into a wrestling match. The deck catches, the tires spin, and one slip can dent a floor or pull a muscle. A decent set of ramps solves all that — if you choose the right type.

The market splits into two camps: portable loading ramps for trucks and trailers, and fixed shed ramps that live permanently at a threshold. Weight capacity, surface grip, and length matter more than brand names. Short ramps are fine for a low step, but tall tailgates and raised shed floors need a longer run to keep the mower deck from scraping.

These four picks cover both situations. The Evcitn ramps are the best portable option for truck beds and trailers. The VNN and Lupar models bolt onto shed thresholds and stay there. The TARNANVEL pair is a lighter, budget-friendly set for small trailers. Before you buy, measure your rise and check your mower’s actual weight — do that first and every ramp below will work better.

Here’s how the four compare at a glance:

Features	Evcitn 75-in	VNN Shed Ramp	Lupar Ramp Kit	TARNANVEL Ramps
Best Use	Truck/trailer loading	Shed/barn thresholds	Sheds & garages	Trailers & small steps
Capacity	1500 lbs per pair	1500 lbs	1500 lbs	880 lbs per pair
Build	Stainless steel	Alloy iron	Powder-coated steel	Waterproof sturdy build
Ramp Length	75 inches	36 inches	29 inches	47.2 inches
Standout Feature	Folds compact, straps included	Pre-drilled, easy mount	Rust-resistant coat	Lightweight, easy storage

Evcitn 75 Truck Ramps

The Evcitn ramps are the most versatile pair here. They’re 75 inches long, fold down to 38.2 inches, and carry up to 1500 pounds as a set. That makes them ideal for loading a riding mower into a pickup truck, utility trailer, or tall shed opening where a fixed ramp won’t reach.

The stainless steel build is the big draw. It resists rust far better than painted steel, which matters if you load equipment in wet grass or leave the ramps in a damp garage. The anti-slip tread runs the full length, and the spring-supported hinge lets the ramps unfold into a flatter, steadier position. You also get two tie-down straps and a set of work gloves in the box, so nothing’s holding you up on first use.

At 1500 pounds per pair, the capacity is overkill for most residential mowers, but that headroom gives you confidence when the machine is wet or caked with mud. The trade-off is size: even folded, these are still around 38 inches long and 9 inches wide, so they’ll take up real trunk or garage space. One person can carry them thanks to the built-in handles, but they’re not light.

• 75-inch length reduces slope angle for low-clearance decks
• Stainless steel construction resists corrosion
• Spring-supported hinge for stable unfolding
• Folded size: 38.2 x 8.9 x 3.7 inches
• Includes 2 tie-down straps, gloves, and hazard tape

Best for: Anyone who needs one portable ramp set for a pickup, trailer, and tall shed opening without buying multiple products.

VNN 36×48 Shed Ramp

The VNN shed ramp is a fixed solution for thresholds up to roughly two inches high. Each piece measures 36 inches long and 24 inches wide, so the pair creates a 48-inch-wide loading path. That surface area makes a real difference when you’re steering a 400-pound mower through a narrow shed door.

The punched plate surface gives tires something to bite into, and the holes drain water instead of letting it pool into a slick film. Rain, wet grass, or morning dew won’t turn the ramp into an ice rink. Installation takes a screwdriver and three screws per ramp thanks to the pre-drilled holes, and the handle on each piece makes it easy to lift away when you need the doorway clear.

The alloy iron construction feels dense and solid, but it’s not a portable product. This ramp lives where you install it, and the 36-inch length means it suits a low threshold rather than a tall tailgate. If your shed floor sits more than a few inches above grade, you’ll want a longer ramp to avoid a steep climb and potential deck damage.

• 1500-pound capacity handles mowers and ATVs
• 36L x 24W x 2H inches per ramp
• Anti-slip punched holes improve grip and drainage
• Pre-drilled holes for quick bolt-down installation
• 12.7-degree ramp angle from the optimized slope design

Best for: Homeowners with a low shed or garage threshold who want a permanent, wide, non-slip ramp that installs in minutes.

Lupar 29×48 Ramp Kit

Lupar’s set is the shortest ramp in this roundup at 29 inches long, but each piece is 24 inches wide, giving you a stable 48-inch path. It’s built for sheds, barns, and garages where the rise is modest and the mower just needs a clean transition over a lip.

The powder-coated steel finish is the standout feature. It resists rust and harsh weather far better than bare metal, which suits a ramp that spends its life outside against a shed wall. The anti-slip punched plate pattern provides traction in rain or mud, and the high-strength steel frame holds up to 1500 pounds without flexing. It ships with pre-drilled holes, so mounting takes a few minutes and you can remove it if the shed needs a clear entrance again.

The short length is the limitation. A 29-inch ramp creates a steeper angle than a 36- or 75-inch ramp at the same rise, so it only makes sense for thresholds of a few inches. Use it on a tall step and you risk scraping the mower deck or losing traction on a steep climb. This is a dedicated shed ramp, not a truck ramp.

• 1500-pound capacity for mowers, ATVs, and snow blowers
• 29L x 24W inches per ramp
• Rust-resistant powder-coated steel finish
• Anti-slip punched plate for all-weather grip
• Pre-drilled holes for secure, removable mounting

Best for: Budget-conscious buyers with a low shed or garage lip who want a durable, weatherproof ramp that installs without extra hardware.

TARNANVEL Trailer Ramps

TARNANVEL’s set is the lightest and most portable option here, designed for trailer and shed entry points below 13 inches. Each ramp measures 47.2 inches long, and the pair handles up to 880 pounds. That’s enough for most riding mowers, small ATVs, and scooters, but not for heavy UTVs or full-size tractors.

The key strength is convenience. The ramps are easy to lift, easy to position, and store flat in a truck bed or warehouse corner. The anti-slip pedals and perforated surface grip tires while allowing water to drain through, so wet weather loading stays predictable. They’re also genuinely portable, which means you can move them between a trailer, a shed, and a raised garage floor without committing to bolts.

The lower capacity is the main trade-off. At 880 pounds per pair, you’re close to the limit with a heavy riding mower, especially when wet grass and a full fuel tank add weight. The narrower width also means you need to center the tires more carefully than on the 24-inch-wide shed ramps. If you own a big lawn tractor or plan to haul an ATV with accessories, step up to a higher-capacity set.

• 880-pound combined capacity; 440 pounds per ramp
• 47.2-inch length for thresholds below 13 inches
• Anti-slip pedals with perforations for grip and drainage
• Portable, lightweight design stores flat
• Works for trailers, sheds, trucks, and garages

Best for: Owners of smaller mowers and ATVs who need a light, movable ramp set for multiple loading spots.

How We Chose These Products

We started with fitment, not features. A ramp only works if it matches the height of the loading surface and the width of the tires. We looked for products that cover the two most common lawn mower scenarios: portable truck/trailer loading and fixed shed thresholds. Each pick needed a clear anti-slip surface, a weight limit that suits real mowers, and a build that won’t fold after a season of use.

We also compared against similar mower ramp tests and checked how each product handles drainage, storage, and installation. The final four represent different use cases rather than four versions of the same design. The Evcitn ramps win for transport, the VNN and Lupar ramps win for permanent shed installs, and the TARNANVEL pair covers light duty on a budget.

Buying Guide: What Really Matters

Measure the rise first. The rise is the vertical distance from the ground to the shed floor, trailer bed, or truck tailgate. Divide that number by the ramp length to get the slope ratio. A lower ratio means a gentler climb and less risk of scraping the mower deck. If your threshold is 12 inches high, a 29-inch ramp gives a steep 1:2.4 slope, while a 75-inch ramp gives a much easier 1:6.25. Match the ramp length to your rise, not to the brand.

Decide between a permanent shed ramp and a portable loading ramp. Shed ramps bolt to the threshold and stay put, which keeps the transition stable and prevents water intrusion if you seal the edges properly. Portable ramps fold up and travel with you, but they need a flat tailgate or threshold lip to sit on securely. Most people end up needing one of each, but if you only load in one spot, a fixed ramp with pre-drilled holes is usually the safer bet.

Check the surface and the weight rating. Punched or perforated plates grip wet tires and drain water, while smooth metal can get slick. Also look at the width: a 24-inch-wide ramp gives tires a bigger margin for error than a 9-inch-wide pair. Make sure the capacity covers your mower’s full weight with fuel and attachments. When in doubt, go higher.

Our Top Recommendation

The Evcitn 75-inch truck ramps are the best overall pick for most people. They’re long enough to protect mower decks on raised tailgates, strong enough for 1500-pound loads, and portable enough to move between a truck and a trailer. The stainless steel build and included straps make them a complete package, and the folding design solves the storage problem that comes with long ramps.

If you only need a permanent setup at a low shed threshold, grab the VNN 36×48 shed ramp instead. It’s wider, easier to install, and purpose-built for daily use. For a lighter budget option, the TARNANVEL ramps work fine with smaller mowers, but double-check your mower’s weight before ordering.

Frequently Asked Questions

How do I calculate the right ramp length for my shed threshold?

Measure the vertical rise from the ground to the threshold. Then divide the rise by the ramp length to find the slope ratio. A 12-inch rise with a 36-inch ramp gives a 1:3 slope, which is steep but workable. A 75-inch ramp gives a gentler 1:6.25 slope. Longer is always safer for low-clearance mower decks.

Can I drive a riding mower up a ramp without damaging the deck?

Yes, if the ramp length is long enough and the mower’s deck sits high enough to clear the ramp edge. As a rule, the longer the ramp, the smaller the approach angle. If you hear the deck scraping, your ramp is too short for that threshold. Loading on an angle can also help clear a tall lip.

Should I bolt my shed ramp down or use portable ramps?

Bolting is better for a permanent location because it stops the ramp from sliding when tires hit the edge. Portable ramps are better if you load in different places or need to keep the doorway clear. The VNN and Lupar ramps use pre-drilled holes for quick mounting, while the Evcitn and TARNANVEL sets are designed for temporary placement.

How do I keep the ramp surface from getting slippery or rusty?

Store portable ramps indoors or under cover when possible. For fixed ramps, sweep away wet leaves and mud before use. If the anti-slip coating wears down, apply a non-slip grip tape or fresh textured paint made for metal. Check hinges and bolts every spring, especially on folding ramps like the Evcitn.