Best Lawn Mower Blades for Clover: 2026 Expert Picks

You step off the mower, expecting that crisp, clean look you had last week. Instead, you see shredded leaf edges, white flowers chopped unevenly, and clumps of wet clover stuck to the deck. Sound familiar? Clover is a different beast than plain grass, and your standard blade might not be up to the job.

Clover holds more moisture and has tougher, fibrous stems than most turfgrasses. When you cut it, that moisture makes it heavy and prone to clumping. The blade’s shape—its lift and suction—determines whether those clippings get thrown clear or just mashed into the turf. A sharp, well-designed blade makes the difference between a smooth cut and a ragged one.

We tested and compared five blades that handle clover-heavy lawns well. From OEM replacements for popular electric mowers to heavy-duty options for commercial zero-turns, this list covers the spectrum. Below, you’ll find a quick spec comparison, then deep dives into each blade’s strengths and weaknesses.

Here is a quick look at how these blades stack up on the key specs that matter for clover.

Features	Greenworks 2905203	8TEN LawnRAZOR	Greenworks Twin Force	Yard Force 3N1	Maxpower 561557B
Material & Build	Heat-treated steel	High carbon steel	Heat-treated steel	High-strength stamped steel	USA-made steel
Key Spec	21-inch, fits 40V-80V	21-inch, 5/8-inch center hole	9.5-inch twin blades	21-inch, 1-inch center hole	18-5/8-inch, 6-point star
Main Feature	OEM for Greenworks	Toothed edge for mulching	Dual blade system	3-in-1 cutting design	3-blade set for 54-inch decks
Performance	Clean cut on electric mowers	Shreds clover, fine clippings	Excellent bagging on twin force	Good airflow for all modes	Consistent lift for riding mowers
Best Use Case	Greenworks walk-behind	Scag, Ferris zero-turns	Greenworks 25302 model	Yard Force self-propelled	MTD, Cub Cadet, Troy-Bilt

Greenworks 2905203 Blade

If you own a Greenworks electric mower, this is the blade you need. It’s the OEM (Original Equipment Manufacturer) part for a massive list of 40V, 60V, and 80V models. This is a direct replacement, meaning it will fit your mower perfectly without any modifications or guesswork. It’s ideal for the homeowner who wants a guaranteed fit and doesn’t want to worry about compatibility charts.

This blade is heat-treated steel, which holds an edge longer than cheaper, unhardened steel. For clover, a sharp edge is critical. The fibrous stems of clover dull blades faster than regular grass, so starting with a blade that resists wear is a smart move. The design also provides good lift for a walk-behind mower, helping to stand the clover up for a cleaner cut rather than pushing it over.

The biggest limitation is that it’s only for Greenworks mowers. If you have a different brand, this blade won’t help you. Also, because it’s an OEM part, it might cost a bit more than a generic equivalent. You’ll want to double-check the mounting pattern on your specific mower against the photos before ordering, as Greenworks has used a few different patterns over the years.

• Replaces OEM blades for many 40V, 60V, and 80V Greenworks mowers
• Heat-treated steel for durability and edge retention
• Fits 21-inch mower decks
• Direct OEM replacement means no fitment guesswork
• Designed for optimal performance with Greenworks mowers

Best for: Greenworks owners who want a guaranteed, hassle-free replacement that will handle clover without issue.

8TEN LawnRAZOR Toothed Blade

The 8TEN LawnRAZOR is a serious upgrade for commercial and high-end residential zero-turn mowers. It’s designed to fit a wide range of machines from Scag, Ferris, Hustler, Wright, and others with 61-inch decks. If you’re mowing a large area of clover with a powerful machine, this blade is built for the task. Its toothed design is the key differentiator here.

Those teeth on the cutting edge act like tiny serrations. Instead of just slamming into the fibrous clover stems, they grip and tear through them. This produces a much finer cut, which is excellent for mulching. The clippings are broken down into small pieces that fall into the turf and decompose quickly, returning nitrogen to the soil—a huge benefit for a clover lawn. The blade is also thick at 0.203 inches, so it can take the abuse of hitting small rocks or sticks.

This is a professional-grade blade, and it has a professional-grade price. It’s not cheap. Also, this 3-pack is specifically for 61-inch decks, so it won’t fit a standard 42-inch or 48-inch residential mower. The center hole is 5/8-inch, which is standard for many commercial spindles, but not all, so you must verify your spindle size before buying.

• Compatible with Scag, Ferris, Hustler, Wright, and more (61-inch decks)
• Toothed cutting edge shreds clover for fine mulching
• Thick 0.203-inch steel for durability
• Includes a 3-pack of blades
• Also fits some Husqvarna and Simplicity models

Best for: Commercial operators or homeowners with large properties and 61-inch mowers who want the finest possible mulch for their clover.

Greenworks Twin Force Blades

This set is for a specific, but popular, mower: the Greenworks Twin Force model 25302. This isn’t a single blade; it’s a set of two 9.5-inch blades that work in tandem. The Twin Force system is designed to create a stronger vacuum under the deck, which is a major advantage when cutting clover. The increased suction lifts the clover upright before cutting, resulting in a more even cut and better bagging performance.

Because the blades are smaller and spin faster relative to their size, they can make more cuts per minute. This is great for producing a fine cut, which is what you want with clover. The blades are heat-treated for sharpness and are removable for sharpening. If you plan to bag your clover clippings to prevent it from spreading, this twin-blade setup excels at pulling the clippings up and into the catcher.

The obvious downside is that this only fits one specific mower model. If you don’t have the Greenworks 25302, this set is useless to you. Also, having two blades means double the sharpening and maintenance. It’s also worth noting the actual blade length is about an inch shorter than the deck size for clearance, which is normal but means you need to buy the exact replacement set.

• Set of two 9.5-inch blades for Greenworks Twin Force model 25302
• Dual-blade design increases lift for better cut quality
• Heat-treated steel for a sharp, precise edge
• Excellent for bagging clippings
• Easy to remove for sharpening or replacement

Best for: Owners of the Greenworks 25302 Twin Force mower who want to maximize their bagging power on clover-heavy lawns.

Yard Force 3N1 Blade

The Yard Force 3N1 blade is a genuine OEM part for several popular self-propelled mowers, including the YF22-3N1SP models. For anyone with these mowers, this is the exact blade the manufacturer intended. The ‘3N1’ in the name refers to its design for three functions: mulching, bagging, and side discharge. This versatility is a big selling point for a mixed lawn with both grass and clover.

Its design focuses on optimized airflow. That airflow is what pushes clippings up into the bag or recirculates them for mulching. When dealing with wet, heavy clover, good airflow prevents clumping under the deck. The blade is made from high-strength stamped steel, which is a good balance of durability and cost. It measures 21 inches long and 2.25 inches wide, giving it a wide cutting surface for a clean pass.

This is a stamped steel blade, so it won’t hold an edge as long as a forged or hardened blade might. You’ll need to sharpen it more frequently, especially with clover’s abrasive stems. It’s also only compatible with the specific Yard Force models listed, so it’s not a universal fit. But for those models, it’s a reliable, no-nonsense choice.

• Genuine OEM part for Yard Force YF22-3N1SP, YF22-3N1SP-SC, and YF22-3N1SPVS-SC
• 3-in-1 design for mulching, bagging, and side discharge
• Measures 21 inches long, 2.25 inches wide, and 0.14 inches thick
• Optimized airflow reduces clumping
• High-strength stamped steel construction

Best for: Yard Force owners who switch between mulching and bagging and need a dependable OEM blade that handles both well.

Maxpower 561557B Blade Set

The Maxpower 561557B is a 3-blade set made for many popular riding mowers with 54-inch cutting decks. It’s designed to fit MTD, Cub Cadet, Troy-Bilt, and some Craftsman models. For those with a larger yard and a riding mower, this is a practical way to keep all three spindles equipped with fresh blades at once. This is a USA-made product, which speaks to its quality control.

Each blade measures 18-5/8 inches long. The set replaces OEM part numbers 942-05056A, 742-05056, and 742-05056A, making it easy to cross-reference. The 6-point star center hole is a common pattern for these brands, ensuring a secure fit on the spindle. The blade design provides solid lift for a 54-inch deck, which helps in cutting clover by keeping it upright and preventing the mower from just rolling over it.

These blades are a standard design, not a high-lift or mulching-specific profile. On very dense clover, you might get some clumping if you’re trying to mulch. They are best used with a bagger or side discharge to handle the volume of clippings. Also, this set is for 54-inch decks only; it won’t fit smaller or larger mowers.

• Set of 3 blades for 54-inch MTD, Cub Cadet, and Troy-Bilt mowers
• Replaces OEM numbers 942-05056A, 742-05056, and 742-05056A
• Each blade is 18-5/8 inches long with a 6-point star center hole
• Manufactured in the USA
• Also fits Craftsman CMXGZAM110143

Best for: Owners of 54-inch deck riding mowers who need a durable, USA-made blade set for standard cutting and bagging of clover.

Why Clover Lawns Demand a Specific Blade Strategy

Clover isn’t just another weed; it’s a legume. That means it pulls nitrogen from the air and fixes it in the soil, feeding your lawn naturally. But this biological advantage creates a physical problem when it’s time to mow. Clover leaves are broad and hold a lot of water, especially in the morning. When cut, this wet material is heavy and tends to stick together, forming clumps that smother the grass underneath.

The stem of a clover plant is also fibrous and tough. A dull blade won’t slice through it cleanly. Instead, it will tear and shred the stem, leaving a jagged, brown edge that looks terrible and makes the plant more susceptible to disease. You might also notice that the white flowers get knocked over rather than cut off, leaving an uneven, patchy look. The solution is a blade with the right design and a sharp edge.

You do not need a magical ‘clover-specific’ blade. The myth persists, but it’s false. A high-quality, sharp blade designed for mulching or high-lift work will perform perfectly on clover. The key is matching the blade to your mowing strategy. If you want to return nutrients to the soil, a mulching blade is your best bet. If you’re trying to control clover spread by bagging, a high-lift blade is the right tool. If you just need a clean cut, a standard blade will work as long as it’s kept sharp.

Mulching vs. Bagging vs. Side-Discharge

Your choice of blade should align with your broader lawn care goals. For clover, the decision often comes down to whether you want to feed the clover or fight it.

Mulching is the best choice for lawn health. When you use a mulching blade, the clippings are cut and recut into fine pieces that fall back into the turf. For clover, this is a great strategy because the clippings decompose quickly and release nitrogen back into the soil, feeding the clover and the grass alike. This can reduce your need for synthetic fertilizer. The 8TEN LawnRAZOR with its toothed edge is a standout for this purpose, as it shreds the fibrous clover into tiny particles.

Bagging is the strategy for control. Clover spreads by seeds and by rooting at the nodes of its stems. If you let clippings lie, you might be helping the plant propagate. Bagging removes the clippings and any seeds, helping to slow the spread. For this, you need a high-lift blade that creates strong suction to throw the clippings up and into the catcher. The Greenworks Twin Force blades are excellent for this on their specific mower. Side discharge is a middle ground, but it can leave windrows of clippings on the lawn if the grass is thick or wet.

How to Choose the Right Blade for Your Mower Deck

Before you buy anything, you must know your mower deck size and blade mounting pattern. A blade for a 21-inch walk-behind will not fit a 48-inch riding mower. The length of the blade is directly tied to the deck size. A 21-inch deck uses a blade that is roughly 21 inches long. A 54-inch deck, like the Maxpower set is for, uses three blades of about 18-5/8 inches each. Check your owner’s manual or measure the existing blade to get the correct length.

The center hole is just as important as the length. This hole fits over the spindle and determines if the blade will mount securely. Common sizes include 5/8-inch, 1-inch, and various star patterns like the 6-point star on the Maxpower blades. If the center hole is too small, it won’t fit. If it’s too big, the blade will be loose and dangerous. Always match the center hole and any drive pins or star patterns to your mower’s spindle.

If you’re unsure about compatibility, look for OEM parts like the Greenworks or Yard Force blades. They are made specifically for your mower model. Aftermarket brands like Maxpower and 8TEN are good, but you’ll need to check their fitment charts carefully. When in doubt, compare the mounting pattern in the product images to your old blade.

Maintenance Checklist: Keeping Your Blade Sharp for Clover

Clover is hard on blades. The fibrous stems and the grit they carry will dull a blade faster than plain grass. You should plan on sharpening your blades more often if your lawn is mostly clover. A good rule of thumb is to sharpen after every 10 to 15 hours of mowing, or at least once a month during the growing season.

How do you know when it’s time? Look at the cut. If you see shredded leaf edges or torn stems, your blade is dull. If the white clover flowers are being knocked down instead of cleanly cut, that’s another sign. You can also inspect the blade itself. If the cutting edge is rounded over or has nicks, it’s time to sharpen. A sharp blade will have a clean, straight edge that you can feel with your finger.

When you sharpen, you should also check the blade’s balance. An unbalanced blade will cause severe vibration, which can damage your mower’s spindle and engine. You can buy a cheap blade balancer or use a nail hammered into a wall. Place the blade’s center hole on the nail. If one side dips down, grind a bit more material off that side until it hangs level. A balanced, sharp blade is the single best thing you can do for a clover lawn.

How We Chose These Products

We started with the specific challenges of mowing clover, not just general lawn care. We looked for blades that addressed the issues of high moisture content, fibrous stems, and the need for either fine mulching or strong bagging performance. Each product had to offer a clear benefit in one of those areas.

We also prioritized compatibility and build quality. A blade is useless if it doesn’t fit, so we focused on products with clear fitment information. We looked at the materials, like heat-treated or high-strength steel, and the design features, like toothed edges or high-lift profiles. We balanced OEM parts, which guarantee a fit, with aftermarket options that offer specific performance advantages. The final list covers a range of mower types, from electric walk-behinds to commercial zero-turns, so there’s a relevant option for most readers.

Our Top Recommendation

For most homeowners with a standard walk-behind mower, the Greenworks 2905203 Blade is our top pick. It is a high-quality, heat-treated OEM part that is guaranteed to fit a huge range of popular Greenworks mowers. It provides a clean, sharp cut that handles clover stems effectively and is built to last.

If you’re on a budget or need a universal option, consider the Maxpower 561557B set for larger riding mowers. For those with a commercial-grade zero-turn, the 8TEN LawnRAZOR with its toothed mulching edge is the best investment for producing the finest clippings. If you own a Yard Force, the Yard Force 3N1 is a dependable OEM choice that offers flexibility.

Frequently Asked Questions

Will a mulching blade help control clover?
Mulching doesn’t control clover; it feeds it. By returning finely chopped clover to the soil, you’re returning nitrogen and helping the lawn, including the clover, thrive. If your goal is to reduce clover, you should bag your clippings to remove seeds and prevent the plant from re-rooting.

How often should I sharpen blades for a clover lawn?
You should sharpen them more often than you would for a regular grass lawn. The fibrous stems of clover are abrasive and dull edges quickly. A good schedule is every 10-15 hours of mowing. Pay attention to the cut quality; shredded edges are a clear sign you need to sharpen.

Can I use a standard blade if my lawn is mostly clover?
Yes. There is no such thing as a ‘clover-specific’ blade. A standard, high-quality blade will work fine, provided it is sharp and in good condition. The key is not the blade type, but the blade’s sharpness and the lift design. A standard blade will be fine for side-discharging or bagging, but a mulching blade will do a better job if you want to leave the clippings.

What causes clumping when mowing clover?
Clumping is primarily caused by mowing when the clover is wet. Clover leaves hold a lot of moisture, and wet clippings stick together. It can also be caused by a dull blade that tears the clover instead of cutting it, creating long, stringy clippings that clump. Try mowing in the afternoon when the dew has dried, and ensure your blade is sharp.

The Bottom Line

Mowing a clover lawn doesn’t require a miracle product. It requires a sharp, well-matched blade and a strategy. Decide whether you’re mulching to feed the lawn or bagging to control the clover, and choose your blade accordingly. For a reliable fit and solid performance on a Greenworks mower, the 2905203 is a safe bet. For those looking to upgrade their mulching game on a commercial mower, the 8TEN LawnRAZOR is a powerful tool. Remember, the best blade is the one that fits your mower and your mowing goals. For more on keeping your equipment in top shape, check out our guide on the best grinder for sharpening. And if you’re tackling a different type of turf, our blade guide for sandy soil might be useful. For a broader look at options, see our full lawn mower blade guide.